I am connecting to a linux firewall/router/dhcp server with sshd with the latest version of Safe Passage which I downloaded from your website.
Safe Passage opens the tunnel fine. I am using exclude mode.
I can't connect to any windows shares on the remote lan.
I'm not sure if the configuration I am using is correct though.
From what I've read in the forums and SP documentation I should be able to connect to windows shares right? Start->run->\\windowsbox or \\192.x.x.x gives a: "network path not found error'
sostech
Joined: 23 Nov 2005
Posts: 4
Posted:
Wed Nov 23, 2005 10:43 pm
Both ip ranges for the remote and local lan are 192.168.1.x could this be a problem? I'm going to try changing the local router to 10.10.10.x to see if that helps...
sostech
Joined: 23 Nov 2005
Posts: 4
Posted:
Wed Nov 23, 2005 11:36 pm
Ok I don't know what Im doing....
I changed the ip on my local router to 10.x.x.x and then when I tried connecting to the tunnel everything works ok 'cept I couldn't ping anything from a cmd prompt?? Pinging from the shell in Safepassage was fine however.
I rebooted a couple of times and now its working I can access the shares fine.
What could be cause this intermittent behaviour? I'm going to keep testing.
sostech
Joined: 23 Nov 2005
Posts: 4
Posted:
Thu Nov 24, 2005 4:56 pm
My last post wasn't clear... I mean I couldn't ping any sites like google. I realize that pinging remote lan won't work....
View next topic View previous topic
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
